The Effect of Different Oxidants on Extraction of Uranium from Low Grade Ore

2020

Closed access Metadata (CSL-JSON)
DOI 10.4028/www.scientific.net/ssp.299.1104
Data confidence 70 medium
How this score is calculated

It is built from checkable properties of the record itself: whether the article has a DOI, how many independent sources confirmed its data, whether the required fields are filled in, and how recent the latest confirmation is. Disagreement between sources and a missing identifier lower it. A value of 80 or above means the record was published without further checking; 60 to 79 means it is published at reduced confidence, with a manual check advisable. A record verified by an editor by hand is never pushed below 90 by a recalculation. This scores our data about the article, not the article itself.

Abstract

The effect of different oxidants on extraction of uranium from low grade ore was studied. Leaching was performed using sulfuric acid solutions at a concentration of 10 to 30%. Ferric sulfate Fe2(SO4)3, ammonium persulphate (NH4)2S2O8, and potassium permanganate KMnO4 at different concentrations were used as oxidants in different variants of the experiment. In addition, solutions collected at Vostok deposit containing 6.86 g/L Fe3+ and 106 cells/mL of the bacteria Acidithiobacillusferrooxidans were used for leaching. The rate of uranium extraction with sulfuric acid solutions without oxidants was low and did not exceed 19.4%. Addition of oxidants made it possible to increase rate of uranium extraction. In the presence of ferric sulfate, ammonium persulphate, and potassium permanganate rates of uranium extraction were up to 68, 95.2, and 69.6%, respectively. The rate of uranium leaching in the experiments with the AMD sample was high and reached about 95%. Therefore, it can be concluded that using not only oxidizing agents, but AMD, which are formed during the natural oxidation of sulfide minerals contained in the ore of the deposit, can significantly increase the rate of uranium recovery.