The Effect of Different Oxidants on Extraction of Uranium from Low Grade Ore

2020

Жабық қол жеткізу Метадеректер (CSL-JSON)
DOI 10.4028/www.scientific.net/ssp.299.1104
Деректер сенімділігі 70 орташа
Бұл баға қалай есептеледі

Ол жазбаның өзінің тексерілетін белгілерінен құралады: мақаланың DOI-і бар ма, оның деректерін қанша тәуелсіз дереккөз растады, міндетті өрістер толтырылған ба және соңғы растау қаншалықты жаңа. Дереккөздер арасындағы алшақтық пен идентификатордың болмауы бағаны төмендетеді. 80-нен бастап мән жазбаның қосымша тексерусіз жарияланғанын, 60-тан 79-ға дейін — оның сенімділігі төмен күйде жарияланғанын және қолмен тексеру ұсынылатынын білдіреді. Редактор қолмен тексерген жазбаны қайта есептеу 90-нан төмен түсірмейді. Бұл — мақаланың өзіне емес, ол туралы деректерімізге берілген баға.

Аңдатпа

The effect of different oxidants on extraction of uranium from low grade ore was studied. Leaching was performed using sulfuric acid solutions at a concentration of 10 to 30%. Ferric sulfate Fe2(SO4)3, ammonium persulphate (NH4)2S2O8, and potassium permanganate KMnO4 at different concentrations were used as oxidants in different variants of the experiment. In addition, solutions collected at Vostok deposit containing 6.86 g/L Fe3+ and 106 cells/mL of the bacteria Acidithiobacillusferrooxidans were used for leaching. The rate of uranium extraction with sulfuric acid solutions without oxidants was low and did not exceed 19.4%. Addition of oxidants made it possible to increase rate of uranium extraction. In the presence of ferric sulfate, ammonium persulphate, and potassium permanganate rates of uranium extraction were up to 68, 95.2, and 69.6%, respectively. The rate of uranium leaching in the experiments with the AMD sample was high and reached about 95%. Therefore, it can be concluded that using not only oxidizing agents, but AMD, which are formed during the natural oxidation of sulfide minerals contained in the ore of the deposit, can significantly increase the rate of uranium recovery.