Research of technological parameters for producing thermal insulating arbolite based on developed slag alkali binders

2024

Full text Open access: Gold Metadata (CSL-JSON)
DOI 10.54355/tbus/4.3.2024.0065
Data confidence 85 high
How this score is calculated

It is built from checkable properties of the record itself: whether the article has a DOI, how many independent sources confirmed its data, whether the required fields are filled in, and how recent the latest confirmation is. Disagreement between sources and a missing identifier lower it. A value of 80 or above means the record was published without further checking; 60 to 79 means it is published at reduced confidence, with a manual check advisable. A record verified by an editor by hand is never pushed below 90 by a recalculation. This scores our data about the article, not the article itself.

Abstract

The paper presents the results of studies of an arbolite block made from rice husks. Granulated blast furnace slag of «Qarmet» OJSC and Dzhambul phosphorus slag were used as slag-alkali binders. The resulting material was examined for basic thermal and mechanical characteristics. As a result, it was found that the adhesion strength of the developed slag-alkali binders with rice husks exceeds the adhesion strength of Portland cement with the latter by 1.40 - 4.08 times, where slag-alkaline arbolite was obtained based on rice husks with an average density of 450-800 kg/m3 and a strength of 0.6 – 3.41 MPa. The frost resistance of the developed wood concrete compositions ranges from 15 to 30 cycles of alternating freezing and thawing. The results of this study can be used in the future when designing energy-efficient buildings.