Research of technological parameters for producing thermal insulating arbolite based on developed slag alkali binders

2024

Полный текст Открытый доступ: Gold Метаданные (CSL-JSON)
DOI 10.54355/tbus/4.3.2024.0065
Достоверность данных 85 высокая
Как считается эта оценка

Складывается из проверяемых признаков самой записи: есть ли у статьи DOI, сколько независимых источников подтвердили её данные, заполнены ли обязательные поля и насколько свежо последнее подтверждение. Снижают оценку расхождения между источниками и отсутствие идентификатора. Значение от 80 означает, что запись опубликована без дополнительной проверки; от 60 до 79 — что она опубликована с пониженной достоверностью и ручная проверка желательна. Запись, выверенную редактором вручную, пересчёт не опускает ниже 90. Это оценка наших данных о статье, а не оценка самой статьи.

Аннотация

The paper presents the results of studies of an arbolite block made from rice husks. Granulated blast furnace slag of «Qarmet» OJSC and Dzhambul phosphorus slag were used as slag-alkali binders. The resulting material was examined for basic thermal and mechanical characteristics. As a result, it was found that the adhesion strength of the developed slag-alkali binders with rice husks exceeds the adhesion strength of Portland cement with the latter by 1.40 - 4.08 times, where slag-alkaline arbolite was obtained based on rice husks with an average density of 450-800 kg/m3 and a strength of 0.6 – 3.41 MPa. The frost resistance of the developed wood concrete compositions ranges from 15 to 30 cycles of alternating freezing and thawing. The results of this study can be used in the future when designing energy-efficient buildings.