Abstract
Abstract A standard procedure for characterizing the high-purity germanium detector (HPGe), manufactured by Canberra Industries Inc [1], is performed directly by the company using patented methods. However, the procedure is usually expensive and must be repeated because the characteristics of the HPGe crystal change over time. In this work, the principles of a technique are developed for use in obtaining and optimizing the detector characteristics based on a cost-effective procedure in a standard research laboratory. The technique requires that the detector geometric parameters are determined with maximum accuracy by the Monte Carlo method [2] in parallel with the optimization based on evolutionary algorithms. The development of this approach facilitates modeling of the HPGe detector as a standardized procedure. The results will be also beneficial in the development of gamma spectrometers and/or their calibrations before routine measurements.