Abstract
In an accelerated aging experiment involving a wide range of cumulative UV-B radiant exposures (up to approximately 9.46 × 103 J cm−2), the degradation state of microplastics was assessed using SEM, FTIR, Raman spectroscopy, and DSC, and correlated with the cumulative UV-B dose. Sunlight-induced photooxidation is a significant weathering mechanism for microplastics. In this study, high-density polyethylene (HDPE), low-density polyethylene (LDPE), polypropylene (PP), polyvinyl chloride (PVC), nylon, and polystyrene (PS) were exposed to UV-B radiation under controlled dry conditions at two irradiance levels (0.06 and 0.6 mW cm−2), covering cumulative UV-B radiant exposures of up to approximately 9.47 × 103 J cm−2. Degradation was evaluated using SEM, FTIR, Raman spectroscopy, and DSC, and was related to the cumulative UV-B dose (H). The extent and progression of degradation varied significantly among the polymers. Overall, FTIR provided the most sensitive assessment of photooxidative surface changes for HDPE, LDPE, PP, and PS, Raman spectroscopy was most diagnostic for PVC (particularly for dechlorination-related changes), and DSC-derived crystallinity was most informative for nylon. These dose-resolved datasets establish a reproducible reference framework (“degradation library”) to facilitate the comparative assessment of the relative photooxidative aging stage of microplastics under comparable surface UV-driven conditions. Outdoor “sunlight-equivalent” times are reported solely as order-of-magnitude contextualization due to environmental variability.