The influence of the average residence time of the fiber in the set of the main drum and the flats of the carding machine on the carding degree

Gulzhan Murzabayeva, Abilda Abdykadyrovich Yeshzhanov, Rashid Kaldybaev

E3S Web of Conferences, 2024

Full text Open access: Gold Metadata (CSL-JSON)

DOI 10.1051/e3sconf/202447401025

Data confidence 70 medium

How this score is calculated

It is built from checkable properties of the record itself: whether the article has a DOI, how many independent sources confirmed its data, whether the required fields are filled in, and how recent the latest confirmation is. Disagreement between sources and a missing identifier lower it. A value of 80 or above means the record was published without further checking; 60 to 79 means it is published at reduced confidence, with a manual check advisable. A record verified by an editor by hand is never pushed below 90 by a recalculation. This scores our data about the article, not the article itself.

Abstract

The article presents the results of calculating the average residence time of the fiber in the flat set of the main carding zone for carding machines TS-03 (Trutzschler) and C60 (Rieter). The fiber carding degree in the “drum-flat” zone was studied. The carding degree by the teeth of the main drum of free fibers held by the needles of the flats and the carding degree by the needles of the flats of free fibers held by the teeth of the main drum were determined. The total carding degree in the “drum-flat” zone of the carding machine was calculated.