The influence of the average residence time of the fiber in the set of the main drum and the flats of the carding machine on the carding degree

E3S Web of Conferences, 2024

Полный текст Открытый доступ: Gold Метаданные (CSL-JSON)
DOI 10.1051/e3sconf/202447401025
Достоверность данных 70 средняя
Как считается эта оценка

Складывается из проверяемых признаков самой записи: есть ли у статьи DOI, сколько независимых источников подтвердили её данные, заполнены ли обязательные поля и насколько свежо последнее подтверждение. Снижают оценку расхождения между источниками и отсутствие идентификатора. Значение от 80 означает, что запись опубликована без дополнительной проверки; от 60 до 79 — что она опубликована с пониженной достоверностью и ручная проверка желательна. Запись, выверенную редактором вручную, пересчёт не опускает ниже 90. Это оценка наших данных о статье, а не оценка самой статьи.

Аннотация

The article presents the results of calculating the average residence time of the fiber in the flat set of the main carding zone for carding machines TS-03 (Trutzschler) and C60 (Rieter). The fiber carding degree in the “drum-flat” zone was studied. The carding degree by the teeth of the main drum of free fibers held by the needles of the flats and the carding degree by the needles of the flats of free fibers held by the teeth of the main drum were determined. The total carding degree in the “drum-flat” zone of the carding machine was calculated.