Practical Large Scale Antenna Systems for 5G cellular networks

2015

Closed access Metadata (CSL-JSON)
DOI 10.1109/ieee-iws.2015.7164529
Data confidence 70 medium
How this score is calculated

It is built from checkable properties of the record itself: whether the article has a DOI, how many independent sources confirmed its data, whether the required fields are filled in, and how recent the latest confirmation is. Disagreement between sources and a missing identifier lower it. A value of 80 or above means the record was published without further checking; 60 to 79 means it is published at reduced confidence, with a manual check advisable. A record verified by an editor by hand is never pushed below 90 by a recalculation. This scores our data about the article, not the article itself.

Abstract

In order to increase capacity and reduce power consumption for future cellular networks, new cellular architectures and radio access schemes will be required. Two important technologies for future 5G and 6G networks include Cloud-Radio Access Networks (C-RAN) and Large Scale Antenna Systems (LSAS) with hundred's of low power radios to increase the cell capacity with multi-user MIMO multiplexing and beamforming. Although LSAS in theory promises large capacity gains at the fraction of the power consumed by the current macro-basestations; there are many practical challenges that need to be overcome before LSAS can be successfully integrated into current and future cellular networks: 1) low-power beamforming algorithms, 2) frequency, amplitude, and phase calibration of asynchronous radios; 3) irregular array beamforming, 4) front-haul data capacity linkage between the LSAS and a C-RAN unit; and 5) standardized measurement procedures. This paper briefly examines each challenge and proposes possible solutions.