Practical Large Scale Antenna Systems for 5G cellular networks

2015

Закрытый доступ Метаданные (CSL-JSON)
DOI 10.1109/ieee-iws.2015.7164529
Достоверность данных 70 средняя
Как считается эта оценка

Складывается из проверяемых признаков самой записи: есть ли у статьи DOI, сколько независимых источников подтвердили её данные, заполнены ли обязательные поля и насколько свежо последнее подтверждение. Снижают оценку расхождения между источниками и отсутствие идентификатора. Значение от 80 означает, что запись опубликована без дополнительной проверки; от 60 до 79 — что она опубликована с пониженной достоверностью и ручная проверка желательна. Запись, выверенную редактором вручную, пересчёт не опускает ниже 90. Это оценка наших данных о статье, а не оценка самой статьи.

Аннотация

In order to increase capacity and reduce power consumption for future cellular networks, new cellular architectures and radio access schemes will be required. Two important technologies for future 5G and 6G networks include Cloud-Radio Access Networks (C-RAN) and Large Scale Antenna Systems (LSAS) with hundred's of low power radios to increase the cell capacity with multi-user MIMO multiplexing and beamforming. Although LSAS in theory promises large capacity gains at the fraction of the power consumed by the current macro-basestations; there are many practical challenges that need to be overcome before LSAS can be successfully integrated into current and future cellular networks: 1) low-power beamforming algorithms, 2) frequency, amplitude, and phase calibration of asynchronous radios; 3) irregular array beamforming, 4) front-haul data capacity linkage between the LSAS and a C-RAN unit; and 5) standardized measurement procedures. This paper briefly examines each challenge and proposes possible solutions.