Numerical simulations of shock-wave interaction with a boundary layer in the plane supersonic flows with jet injection

2016

Closed access Metadata (CSL-JSON)
DOI 10.1134/s0869864316020037
Data confidence 70 medium
How this score is calculated

It is built from checkable properties of the record itself: whether the article has a DOI, how many independent sources confirmed its data, whether the required fields are filled in, and how recent the latest confirmation is. Disagreement between sources and a missing identifier lower it. A value of 80 or above means the record was published without further checking; 60 to 79 means it is published at reduced confidence, with a manual check advisable. A record verified by an editor by hand is never pushed below 90 by a recalculation. This scores our data about the article, not the article itself.

Abstract

A supersonic air flow in a plane channel with a transverse turbulent jet of hydrogen injected through a slot on the bottom wall is simulated. The algorithm for solving the Favre-averaged Navier-Stokes equations for the flow of a perfect multispecies gas on the basis of the WENO scheme is proposed. The main attention is paid to the interaction of the shock-wave structure with the boundary layers on the upper and lower duct walls under the conditions of an internal turbulent flow. Namely, a detailed study of the structure of the flow is done, and separation and mixing depending on the jet slot width are investigated. It is found that in addition to well-known shock-wave structures produced by the interaction of the free stream with the transverse jet and the bow shock interaction with the boundary layers near the walls, an additional system of shock waves and the flow separation arise on the bottom wall downstream at some distance from the jet. The comparison with the experimental data is performed.