Numerical simulations of shock-wave interaction with a boundary layer in the plane supersonic flows with jet injection

2016

Закрытый доступ Метаданные (CSL-JSON)
DOI 10.1134/s0869864316020037
Достоверность данных 70 средняя
Как считается эта оценка

Складывается из проверяемых признаков самой записи: есть ли у статьи DOI, сколько независимых источников подтвердили её данные, заполнены ли обязательные поля и насколько свежо последнее подтверждение. Снижают оценку расхождения между источниками и отсутствие идентификатора. Значение от 80 означает, что запись опубликована без дополнительной проверки; от 60 до 79 — что она опубликована с пониженной достоверностью и ручная проверка желательна. Запись, выверенную редактором вручную, пересчёт не опускает ниже 90. Это оценка наших данных о статье, а не оценка самой статьи.

Аннотация

A supersonic air flow in a plane channel with a transverse turbulent jet of hydrogen injected through a slot on the bottom wall is simulated. The algorithm for solving the Favre-averaged Navier-Stokes equations for the flow of a perfect multispecies gas on the basis of the WENO scheme is proposed. The main attention is paid to the interaction of the shock-wave structure with the boundary layers on the upper and lower duct walls under the conditions of an internal turbulent flow. Namely, a detailed study of the structure of the flow is done, and separation and mixing depending on the jet slot width are investigated. It is found that in addition to well-known shock-wave structures produced by the interaction of the free stream with the transverse jet and the bow shock interaction with the boundary layers near the walls, an additional system of shock waves and the flow separation arise on the bottom wall downstream at some distance from the jet. The comparison with the experimental data is performed.