An Integrated Approach to Gold Extraction from Man-Made Raw Materials with High Carbon Content

Acta Metallurgica Slovaca, 2026

Full text Open access: Gold Metadata (CSL-JSON)
DOI 10.36547/ams.32.2.2276
Data confidence 70 medium
How this score is calculated

It is built from checkable properties of the record itself: whether the article has a DOI, how many independent sources confirmed its data, whether the required fields are filled in, and how recent the latest confirmation is. Disagreement between sources and a missing identifier lower it. A value of 80 or above means the record was published without further checking; 60 to 79 means it is published at reduced confidence, with a manual check advisable. A record verified by an editor by hand is never pushed below 90 by a recalculation. This scores our data about the article, not the article itself.

Abstract

This study presents the results of investigating the effect of reverse carbon flotation on gold recovery from secondary technogenic raw materials—aged sorption tailings with a high carbon content and refractory forms of gold. Direct cyanidation of the initial material showed low efficiency (up to 13% gold recovery) due to the pronounced preg-robbing effect. Comparative flotation tests demonstrated that the highest gold losses occurred during conventional sulfide flotation using xanthate. Additional grinding of the material increased gold extraction during cyanidation but was accompanied by higher losses during flotation. The application of reverse carbon flotation with kerosene and frother effectively removed the carbonaceous fraction and reduced gold adsorption from the solution. Further oxidation with trichloroisocyanuric acid enhanced the gold recovery up to 78.25%. Biological oxidation using Acidithiobacillus ferrooxidans also increased the gold recovery from both the initial material and the products of reverse flotation.