An Integrated Approach to Gold Extraction from Man-Made Raw Materials with High Carbon Content

Acta Metallurgica Slovaca, 2026

Полный текст Открытый доступ: Gold Метаданные (CSL-JSON)
DOI 10.36547/ams.32.2.2276
Достоверность данных 70 средняя
Как считается эта оценка

Складывается из проверяемых признаков самой записи: есть ли у статьи DOI, сколько независимых источников подтвердили её данные, заполнены ли обязательные поля и насколько свежо последнее подтверждение. Снижают оценку расхождения между источниками и отсутствие идентификатора. Значение от 80 означает, что запись опубликована без дополнительной проверки; от 60 до 79 — что она опубликована с пониженной достоверностью и ручная проверка желательна. Запись, выверенную редактором вручную, пересчёт не опускает ниже 90. Это оценка наших данных о статье, а не оценка самой статьи.

Аннотация

This study presents the results of investigating the effect of reverse carbon flotation on gold recovery from secondary technogenic raw materials—aged sorption tailings with a high carbon content and refractory forms of gold. Direct cyanidation of the initial material showed low efficiency (up to 13% gold recovery) due to the pronounced preg-robbing effect. Comparative flotation tests demonstrated that the highest gold losses occurred during conventional sulfide flotation using xanthate. Additional grinding of the material increased gold extraction during cyanidation but was accompanied by higher losses during flotation. The application of reverse carbon flotation with kerosene and frother effectively removed the carbonaceous fraction and reduced gold adsorption from the solution. Further oxidation with trichloroisocyanuric acid enhanced the gold recovery up to 78.25%. Biological oxidation using Acidithiobacillus ferrooxidans also increased the gold recovery from both the initial material and the products of reverse flotation.