RESEARCH AND DEVELOPMENT OF RESOURCE-SAVING TECHNOLOGIES FOR RECYCLING OF TECHNOGENIC WASTE

2026

Full text Open access: Hybrid Metadata (CSL-JSON)
DOI 10.51885/3134-8009_jes_2026_1_14
Data confidence 70 medium
How this score is calculated

It is built from checkable properties of the record itself: whether the article has a DOI, how many independent sources confirmed its data, whether the required fields are filled in, and how recent the latest confirmation is. Disagreement between sources and a missing identifier lower it. A value of 80 or above means the record was published without further checking; 60 to 79 means it is published at reduced confidence, with a manual check advisable. A record verified by an editor by hand is never pushed below 90 by a recalculation. This scores our data about the article, not the article itself.

Abstract

The process of decommissioning uranium production equipment and technological tools leads to the formation and accumulation of metallic radioactive waste. The majority of this waste falls into the category of low-level radioactive waste and requires special conditions for storage. The use of ultrasonic treatment of TRW contributes to an increase in decontamination coefficients compared to traditional methods, while reducing the duration of the process. It has been established that the types of filter fabrics considered are subject to regeneration with the possibility of their subsequent use in industrial conditions. The effect of various solutions on the efficiency of the decontamination process of metal TROs has been studied. The possibility of single-stagecleaning of metal TROs in an ultrasonic field using HNO3 solution to obtain commercial metal with surface contamination of less than 1 alpha particle/cm2‧min at an acceptable level of less than 1.2 alpha particles/cm2‧min has been demonstrated.