RESEARCH AND DEVELOPMENT OF RESOURCE-SAVING TECHNOLOGIES FOR RECYCLING OF TECHNOGENIC WASTE

2026

Полный текст Открытый доступ: Hybrid Метаданные (CSL-JSON)
DOI 10.51885/3134-8009_jes_2026_1_14
Достоверность данных 70 средняя
Как считается эта оценка

Складывается из проверяемых признаков самой записи: есть ли у статьи DOI, сколько независимых источников подтвердили её данные, заполнены ли обязательные поля и насколько свежо последнее подтверждение. Снижают оценку расхождения между источниками и отсутствие идентификатора. Значение от 80 означает, что запись опубликована без дополнительной проверки; от 60 до 79 — что она опубликована с пониженной достоверностью и ручная проверка желательна. Запись, выверенную редактором вручную, пересчёт не опускает ниже 90. Это оценка наших данных о статье, а не оценка самой статьи.

Аннотация

The process of decommissioning uranium production equipment and technological tools leads to the formation and accumulation of metallic radioactive waste. The majority of this waste falls into the category of low-level radioactive waste and requires special conditions for storage. The use of ultrasonic treatment of TRW contributes to an increase in decontamination coefficients compared to traditional methods, while reducing the duration of the process. It has been established that the types of filter fabrics considered are subject to regeneration with the possibility of their subsequent use in industrial conditions. The effect of various solutions on the efficiency of the decontamination process of metal TROs has been studied. The possibility of single-stagecleaning of metal TROs in an ultrasonic field using HNO3 solution to obtain commercial metal with surface contamination of less than 1 alpha particle/cm2‧min at an acceptable level of less than 1.2 alpha particles/cm2‧min has been demonstrated.