Abstract
The article considers physical modeling for aluminum alloy 7075, widely used in mechanical engineering, in particular for elements of aircraft structures. This alloy differs from other rolled aluminum-based alloys not only by high values of strength properties, but also by the presence of a large number of intermetallic compounds of alloying elements. The workpiece for the parts is a round rolled product with regulated mechanical properties. Thus, the purpose of this work was to determine the effect of the deformation pattern that occurs in metal during bar rolling on the mechanical properties of blanks of parts made of aluminum alloy 7075. The present study draws attention to the importance of physical modeling in determining the characteristics of materials necessary for effective management of plastic processing processes. Analyzing the results of physical modeling, we identify the optimal parameters of material processing, such as microstructure, mechanical properties and chemical composition. The results obtained allow a deeper understanding of the physical mechanisms underlying the production of blanks (rods) from aluminum rods of alloy 7075 by rolling, as well as optimizing it to achieve the required technical characteristics of products. Thus, as a result of physical modeling of the rolling process of bars made of aluminum alloy 7075, it was found that when the samples are deformed at a temperature of 250 ° C, the value of the plasticizing stress decreases by about 18%, and a more uniform distribution of microhardness over the transverse and longitudinal sections was obtained compared with deformation at a temperature of 200 °C. The research is of practical importance for the metalworking industry, and can also be used for educational purposes to train specialists in the field of materials science and metalworking. Keywords: workpiece parts, physical modeling, aluminum alloy 7075, metalworking, aluminum alloy microstructure, deformation of samples.