Abstract
As a result of anthropogenic activities, the environment is polluted by heavy metals. The most important task is to find methods to control their content in water. Track-etched membranes (TeMs) can be relatively easily modified by nanometer layers of functional materials with using the Langmuir‒Blodgett technique, which makes it possible to specifically change the structural, selective properties of the membrane surface and obtain new materials with desired properties. The aim of the work was to develop flexible sensors for the analysis of lead ions in water based on poly(ethylene terephthalate) (PET) TeMs with perfluorodecanoic acid (PFDA) nanolayers. Techniques for modifying TeMs based on PET with a monolayer coating based on PFDA by the Langmuir‒Blodgett method, and with two-layer coatings, formed by soaking PET TeMs/PFDA in xylenol orange solutions have been developed. The microstructure and local mechanical properties of the sensor surface were studied by atomic force microscopy, and the wettability and values of the specific surface energy of PET TeMs before and after modification were evaluated using the ''sessile'' drop method. Based on the measurement of electrochemical characteristics, it was found that PET TeMs/PFDA have a higher response of electrochemical characteristics compared to PET TeMs and PET TeMs/PFDA/XO. The limit of detection for lead ions in aqueous solutions at pH = 12 was of 0.652 µg/l within 5 measurements.