Abstract
This article presents the research results of methods for introducing nanodispersed TiO2 powders into a micron matrix of beryllium and titanium oxides. It is shown that the presence of nanoparticles over 5.0 wt.% negatively affects the rheological properties of the casting slip and vice versa, the addition of nanoparticles in the range of 0.1–2.0 wt.% contributes to reducing the viscosity and increasing the casting ability of the slipping mass. Macrostructural analysis of the sintered billet indicates the complete absence of structural elements in the form of conglomerates of nanoparticles, or nano- and micro-TiO2 particles. The developed method of introducing nanoparticles makes it possible to obtain products with their uniform distribution over the entire volume of the workpiece by slip casting under pressure. Further, the authors of the scientific work planned to research the effect of nanoparticles on the thermophysical and impedance characteristics of the obtained ceramics. Research into the effect of nanopowders on the electrophysical properties of beryllium ceramics is not known in the scientific world. The most important properties that the BeO+TiO2 ceramics should possess is the ability to absorb ultrahigh frequency radiation, while it should heat up a little, i.e., conduct heat well. It is necessary to introduce the TiO2 phase into the composition of the BeO ceramics as much as possible to obtain a high coefficient.