Study of the Possibility of Application of Models of Complex Composition in the Technology of Casting on Gasified Models

Tatyana Kovalyova, Aristotel Zeinullinovich Issagulov

2023

Closed access Metadata (CSL-JSON)
DOI 10.52209/1609-1825_2023_2_85
Data confidence 70 medium
How this score is calculated

It is built from checkable properties of the record itself: whether the article has a DOI, how many independent sources confirmed its data, whether the required fields are filled in, and how recent the latest confirmation is. Disagreement between sources and a missing identifier lower it. A value of 80 or above means the record was published without further checking; 60 to 79 means it is published at reduced confidence, with a manual check advisable. A record verified by an editor by hand is never pushed below 90 by a recalculation. This scores our data about the article, not the article itself.

Abstract

The possibility of using models of complex composition in the technology of casting according to gasified models was studied. Mathematical planning of the experiment was carried out in order to determine the optimal ratio between foundry and building polystyrene foam. Experiments were carried out to determine the dependence of the roughness of the casting on the composition of the model and the thickness of the non-stick coating, as well as the dependence of the gas permeability of the model on the thickness of the non-stick coating. Studied the behavior of expanded polystyrene at different temperatures and exposure time. The composition of the models was chosen, consisting of 60% foundry and 40% building polystyrene foam.