Processing and production of pellets from poor-grade manganese-containing raw materials

2021

Full text Open access: Gold Metadata (CSL-JSON)
DOI 10.31643/2021.05
Data confidence 70 medium
How this score is calculated

It is built from checkable properties of the record itself: whether the article has a DOI, how many independent sources confirmed its data, whether the required fields are filled in, and how recent the latest confirmation is. Disagreement between sources and a missing identifier lower it. A value of 80 or above means the record was published without further checking; 60 to 79 means it is published at reduced confidence, with a manual check advisable. A record verified by an editor by hand is never pushed below 90 by a recalculation. This scores our data about the article, not the article itself.

Abstract

there is a review of current researches in the processing of poor-grade manganese raw materials. The variety of manganese minerals caused by the valent state of metal in compounds is demonstrated. Different processing methods for manganese-containing mineral and technogenic raw materials are considered. The process of extraction of manganese from ferruginous manganese ore using reduction roasting and magnetic separation, beneficiation technology of poor-grade manganese ore to improve the ratio of Mn/Fe; processes of beneficiation and sintering of fine ferruginous manganese ore with low manganese content; production of agglomerate from the concentrate of manganese poor-grade ore to produce ferrosilicon manganese are described. Results of the authors researches intended to obtain concentrate from manganese-containing sludge and to produce hardened pellets suitable for melting into ferromanganese on its basis using a new component of the binder are presented.