Determination of oil sand’s moisture

2021

Full text Open access: Hybrid Metadata (CSL-JSON)
DOI 10.51301/vest.su.2021.i2.16
Data confidence 70 medium
How this score is calculated

It is built from checkable properties of the record itself: whether the article has a DOI, how many independent sources confirmed its data, whether the required fields are filled in, and how recent the latest confirmation is. Disagreement between sources and a missing identifier lower it. A value of 80 or above means the record was published without further checking; 60 to 79 means it is published at reduced confidence, with a manual check advisable. A record verified by an editor by hand is never pushed below 90 by a recalculation. This scores our data about the article, not the article itself.

Abstract

This scientific article presents the work on the determination of the moisture content of theoilsand deposits of the Munaili-Mola, Beke, and Dongelek-sor fields were studied. To perform the obtained work, oilsands of Atyrau, Mangistau and Aqtobe regions of Western part of Kazakhstan were used as the object of research. Determination of the moisture content of oil sands were carried out using a drying furnace. Moisture of the oil sands were compared at 106 0C and 150 0C, then dried for 90 minutes. As a result, the indicators for determining the humidity of these oil raw materials at a temperature of 150 0C were higher than the indicators of the corresponding samples at 106 0C. In the process of processing petroleum bituminous rocks by pyrolysis, the amount of moisture contained in it condenses together with evaporated hydrocarbon fractions and completely merges into the collected liquid product, increasing the amount of water in the composition. This is why it is necessary to determine the moisture content of this raw material.