Determination of the main parameters of the photovoltaic solar module

Baydaulet A. Urmashev, Murat Kunelbayev, Almas Temirbekov, Syrym E. Kasenov, Zhadra Zhaksylykova, Farida Amenova

E3S Web of Conferences, 2020

Full text Open access: Gold Metadata (CSL-JSON)

DOI 10.1051/e3sconf/202019101004

Data confidence 70 medium

How this score is calculated

It is built from checkable properties of the record itself: whether the article has a DOI, how many independent sources confirmed its data, whether the required fields are filled in, and how recent the latest confirmation is. Disagreement between sources and a missing identifier lower it. A value of 80 or above means the record was published without further checking; 60 to 79 means it is published at reduced confidence, with a manual check advisable. A record verified by an editor by hand is never pushed below 90 by a recalculation. This scores our data about the article, not the article itself.

Abstract

This article deals with the determination of the main operating parameters of a photovoltaic solar module. In laboratory tests, the study of the dependence of current, voltage and power on time and density of solar radiation, as well as monitoring of environmental parameters: temperature and humidity of the outside air. Analysis of the test results shows that a photoelectric module with an installed capacity of 800 W and a total battery capacity of 800 Ah provides the electric power industry with a daily consumption of 2.0 ... 2.2 kWh. The discharge time of the battery varies from 11.7 to 3.5 hours when the average electric load of the consumer changes from 300 to 1000 watts.