Влияние разности прикладываемых потенциалов на структурные особенности CoCdSe тонких пленок

2020

Full text Open access: Gold Metadata (CSL-JSON)
DOI 10.26577/rcph.2020.v73.i2.07
Data confidence 70 medium
How this score is calculated

It is built from checkable properties of the record itself: whether the article has a DOI, how many independent sources confirmed its data, whether the required fields are filled in, and how recent the latest confirmation is. Disagreement between sources and a missing identifier lower it. A value of 80 or above means the record was published without further checking; 60 to 79 means it is published at reduced confidence, with a manual check advisable. A record verified by an editor by hand is never pushed below 90 by a recalculation. This scores our data about the article, not the article itself.

Abstract

One of the promising materials in the field of semiconductors today is structures based on cadmium, selenium, tellurium and their compounds having one structural type AIIBVI, the interest in which is due to the possibility of their use in various photoelectronic devices, solar cells, LEDs, catalysts, etc. This work is devoted to the study of the properties of thin films based on CoCdSe. As a synthesis method, the electrochemical deposition method was used, which allows us to obtain thin films with specified parameters with high accuracy. Results of the effect of the applied potentials difference on the structural features of CoCdSe thin films are obtained. As substrates for producing thin films, polyethylene terephthalate polymer films were used, which have good adhesion properties, which make it possible to obtain thin films uniform in height and composition. It has been established that a change in the difference in applied potentials leads not only to a change in the thickness of thin films for a given synthesis time interval, but also to a change in the stoichiometric and phase composition of thin films. Using the method of X-ray phase composition, it was found that an increase in the applied potentials difference leads to an increase in the CoSe phase, as well as structural ordering and a decrease in the dislocation density of defects in the films.