Enhancing the stability and efficiency of dye-sensitized solar cells with MIL-125 metal-organic framework as an electrolyte additive

Ayagoz Ibrayeva, Zulfiya Imanbekova, Urker Abibulla, Yerbolat Tashenov, Bakhytzhan Baptayev, Mannix P. Balanay

Scientific Reports, 2025

Full text Open access: Gold Metadata (CSL-JSON)
DOI 10.1038/s41598-025-89913-1
Data confidence 85 high
How this score is calculated

It is built from checkable properties of the record itself: whether the article has a DOI, how many independent sources confirmed its data, whether the required fields are filled in, and how recent the latest confirmation is. Disagreement between sources and a missing identifier lower it. A value of 80 or above means the record was published without further checking; 60 to 79 means it is published at reduced confidence, with a manual check advisable. A record verified by an editor by hand is never pushed below 90 by a recalculation. This scores our data about the article, not the article itself.

Abstract

This study investigates how to improve the stability of liquid electrolyte (LE) dye-sensitized solar cells (DSSCs) by incorporating a titanium-based metal-organic framework (MIL-125). MIL-125, created through the coordination of Ti4+ ions with benzene-1,4-dicarboxylic acid, forms a structure that can effectively accommodate I−/I3− electrolytes, resulting in a MIL-125@electrolyte assembly. This innovative assembly successfully prevents electrolyte leakage while preserving the LE properties. The study examines how the MIL-125@electrolyte enhances both stability and power conversion efficiency (PCE) of DSSCs. The inclusion of the large-surface-area of MIL-125 improves ionic conductivity, reduces charge transfer resistance, and stops leakage. The optimized MIL-125@electrolyte achieves a high PCE of 10.51%, with a peak value of 10.99%, and a notable short-circuit current density of 20.97 mA/cm², peaking at 22.27 mA/cm², under standard AM 1.5, 100 mW/cm² conditions. It maintains about 75% of its PCE after 1400 h at approximately 23 °C. For indoor applications using LED lighting, the quasi-solid-state DSSC reaches a record PCE of 27.6%, with an average of 25.9%, under 6000 lx illumination.