Helium and hydrogen influence upon high temperature ductility of 03Cr2ONi45Mo4NbBZr alloy

1984

Closed access Metadata (CSL-JSON)
DOI 10.1080/01422448408209675
Data confidence 70 medium
How this score is calculated

It is built from checkable properties of the record itself: whether the article has a DOI, how many independent sources confirmed its data, whether the required fields are filled in, and how recent the latest confirmation is. Disagreement between sources and a missing identifier lower it. A value of 80 or above means the record was published without further checking; 60 to 79 means it is published at reduced confidence, with a manual check advisable. A record verified by an editor by hand is never pushed below 90 by a recalculation. This scores our data about the article, not the article itself.

Abstract

Tensile tests of 03Cr2ONi45Mo4NbBZr alloy specimens doped with He (3 × 10−3 at. %), He (3 × 10−3 at. %) + H (9 × 10−3at. %) and H (9 × 10−3at. %) in 650-900°C temperature range have been performed. The results showed that helium embrittles the material at temperatures above 650°C as a rule. The presence of hydrogen in helium doped specimens does not result in any additional changes of alloy ductility. However, in comparison with the initial state hydrogen doping causes some decrease of material ductility at 750–850°C temperatures. Helium doping causes intergranular fracture and fracture of hydrogen doped specimens as well as the undoped ones is transgranular mainly.