Electric and Optical Properties of Polyimide Surface Films Modified by Metals

2004

Full text Open access: Gold Metadata (CSL-JSON)
DOI 10.18321/ectj330
Data confidence 70 medium
How this score is calculated

It is built from checkable properties of the record itself: whether the article has a DOI, how many independent sources confirmed its data, whether the required fields are filled in, and how recent the latest confirmation is. Disagreement between sources and a missing identifier lower it. A value of 80 or above means the record was published without further checking; 60 to 79 means it is published at reduced confidence, with a manual check advisable. A record verified by an editor by hand is never pushed below 90 by a recalculation. This scores our data about the article, not the article itself.

Abstract

Electric and optical properties of polymer films, which were prepared on the basis of polyimides and metallized by binary aggregates Ag with Ni and Co, have been investigated. The metallized polyimide films with additional coating from Ni, Au and Rh have been studied too. It has been found that the temperature dependence of the specific surface resistance in the metallized films at the temperature from 25 up to 160 °C was in the well agreement with linear law. The specific surface resistance at 20 °C and temperature coefficient showed low values and was 0.16-2.24 Ω and 0.69×10-4-19.18×10-4 K-1 respectively. The film reflection coefficient in visible spectrum field at wavelength of 530 nm was 75% and essentially enlarged with wavelength increasing.