Analytical capabilities of a «Grand» spectrometer in analysis of solutions using inductively coupled plasma

2019

Full text Open access: Hybrid Metadata (CSL-JSON)
DOI 10.26896/1028-6861-2019-85-1-ii-82-85
Data confidence 70 medium
How this score is calculated

It is built from checkable properties of the record itself: whether the article has a DOI, how many independent sources confirmed its data, whether the required fields are filled in, and how recent the latest confirmation is. Disagreement between sources and a missing identifier lower it. A value of 80 or above means the record was published without further checking; 60 to 79 means it is published at reduced confidence, with a manual check advisable. A record verified by an editor by hand is never pushed below 90 by a recalculation. This scores our data about the article, not the article itself.

Abstract

It has been shown that «Grand» spectrometers based on a hybrid assembly of BLPP-2000 photodetector arrays produced by «VMK-Optoélektronika» can be used for atomic emission spectral analysis of solutions using inductively coupled plasma atomic emission spectroscopy (ICP-AES). For the prototype of a «Grand-ICP» spectrometer consisting of «Grand» spectrometer, microwave plasma generator, and RF (radiofrequency) generator, the following analytical characteristics were determined: element detection limit, long-term stability, linear ranges of calibration graphs for several elements, and optimal operating parameters of the microwave generator. The linear concentration range of analyte elements is 105when using a single analytical line of the element. The long-term stability is less than 2% in 6 h without using an internal standard. The detection limits are comparable to those of modern ICP spectrometers with an axial plasma survey and lie in a range of sub-microgram per liter. It has been found that the effect of superposition of the spectral lines of the plasma background, for example, OH molecular lines or others, on the analyte lines can be eliminated by subtracting the blank sample spectrum from the analyte spectrum using Atom software. The analytical characteristics of the spectrometer allow the use of the device both for developing new ICP- based systems and restoring the performance of defective ICP spectrometers.