Study of the Influence of Geometric Parameters on the Destruction Possibility of Aluminium Alloys during Pressing in Equal-Channel Step Matrix

Abdrakhman B. Naizabekov, Sergey Nikolaevich Lezhnev, Evgeniy Panin

2022

Full text Open access: Hybrid Metadata (CSL-JSON)
DOI 10.4028/p-dbtu13
Data confidence 85 high
How this score is calculated

It is built from checkable properties of the record itself: whether the article has a DOI, how many independent sources confirmed its data, whether the required fields are filled in, and how recent the latest confirmation is. Disagreement between sources and a missing identifier lower it. A value of 80 or above means the record was published without further checking; 60 to 79 means it is published at reduced confidence, with a manual check advisable. A record verified by an editor by hand is never pushed below 90 by a recalculation. This scores our data about the article, not the article itself.

Abstract

The paper analyzes the influence of various geometric factors on the destruction possibility of aluminum alloys during pressing in an equal-channel step matrix, which allows to obtain an ultrafine-grained structure. It is found that the angle of the junction of the matrix channels has a significant effect on the Cockroft-Latham damage criterion, in contrast to the length of the inclined channel of the matrix. The most optimal value of the joint angle is 135° - in this case, the metal is processed with a sufficiently high intensity at a low level of the fracture criterion. The length of the inclined channel of the matrix is recommended to use no more than 15 mm to reduce the level of damage.