THERMODYNAMIC ANALYSIS SULFATIZING ROASTING OF STALE NICKEL-COBALT-CONTAINING WASTES FROM OPERATING PLANTS

Kulzira Mamyrbayeva, Almira Kuandykova, Tatyana Alexandrovna Chepushtanova

2024

Closed access Metadata (CSL-JSON)
DOI 10.5593/sgem2024v/4.2/s17.22
Data confidence 70 medium
How this score is calculated

It is built from checkable properties of the record itself: whether the article has a DOI, how many independent sources confirmed its data, whether the required fields are filled in, and how recent the latest confirmation is. Disagreement between sources and a missing identifier lower it. A value of 80 or above means the record was published without further checking; 60 to 79 means it is published at reduced confidence, with a manual check advisable. A record verified by an editor by hand is never pushed below 90 by a recalculation. This scores our data about the article, not the article itself.

Abstract

Metallurgy is one of the leaders in terms of the amount of accumulated waste worldwide. Every year the amount of waste placed in dumps, sludge ponds, tailings ponds only grows. However, at present, tailings, slag, dust, etc. of metallurgical enterprises are considered the most promising for secondary use and the extraction of valuable metals from tailings is an important problem in the world. In Kazakhstan, the technology of processing nickel-cobalt-containing tailings is practically undeveloped. Sokolov-Sarybai Mining Production Association Joint-Stock Company (SSGPO JSC) in Kazakhstan, loses more than 7 thousand tons of nickel and 14 thousand tons of cobalt per year. For processing this type of raw material, a combined technology that includes preliminary roasting and leaching processes is acceptable. The aim of the work is a thermodynamic analysis of the roasting process of wet magnetic separation (wms) tailings of the SSGPO JSC, containing such main components as nickel, cobalt and iron sulfides. Thermodynamic analysis of the roasting of wms tailings in the temperature range from 500 to 750�C showed that in the presence of a limited amount of oxygen, the formation of iron sulfides of the following compositions is possible: Fe0.877S, FeS, Fe2S3, Fe7S8. Nickel and cobalt sulfides are converted into Ni3S2, Ni3S4 and CoS0.89, CoS, respectively. In this temperature range, within the homogeneity region, the transformation of cobalt and nickel sulfides also occurs. The calculated values of the Gibbs free energy confirm the possibility of reactions of formation of low-sulfide compounds and the optimal condition for firing is the temperature range of 600-700�C. Depending on the firing conditions, interconversion of iron, nickel and cobalt sulfides occurs. The results of thermodynamic analysis confirm the possibility of extracting iron, nickel and cobalt from wms tailings in the form of soluble low-sulfide compounds with subsequent extraction from the tailings in the form of individual metal powders. Combined technology for processing this type of raw material will be a good example of the use of circular economy principles.