MATHEMATICAL MODELING OF THE NON-STATIONARY THERMAL STATE OF A COMPOSITE COATING OF CLOSE TO EQUIMOLAR COMPOSITION DURING LASER REMELTING

I. M. Yachikov, Abdrakhman B. Naizabekov, Sergey Nikolaevich Lezhnev, Alena A. Myasnikova, Evgeny Alekseevich Trofimov, Evgeniy Panin, Marina Nikolaevna Samodurova

2024

Full text Open access: Gold Metadata (CSL-JSON)
DOI 10.59957/jctm.v59.i5.2024.25
Data confidence 85 high
How this score is calculated

It is built from checkable properties of the record itself: whether the article has a DOI, how many independent sources confirmed its data, whether the required fields are filled in, and how recent the latest confirmation is. Disagreement between sources and a missing identifier lower it. A value of 80 or above means the record was published without further checking; 60 to 79 means it is published at reduced confidence, with a manual check advisable. A record verified by an editor by hand is never pushed below 90 by a recalculation. This scores our data about the article, not the article itself.

Abstract

Based on assumptions and limitations, a mathematical model of the non-stationary thermal state of a composite coating during laser remelting on a metal substrate to obtain an alloy of equimolar or close to equimolar composition has been developed. The model includes the boundary value problem of calculating the nonstationary thermal state of the temperature distribution in the solid, two-phase and liquid regions, considering the heat release of crystallization according to the theory of a quasi-equilibrium two-phase zone in the presence of porosity of a mixture of metal powders. Based on the mathematical model, the computer program “Composite coating thermal state” was created, which allows to determine the non-stationary temperature distribution in the formed coating and substrate, the depth of penetration of the high-entropy coating layer, to evaluate the shrinkage of the molten coating under different technological conditions: laser power, the diameter of its focal spot, as well as the speed of movement along the surface of the processed material. The created program also allows to determine the dynamics of the position of two-dimensional liquidus and solidus lines for each metal included in the mixture. Using the created program, a computer simulation of the process of unsteady heating of a mixture of three metal powders in the same mass fractions: nickel, chromium and iron was carried out. Non-stationary temperature fields in the composite coating are obtained, considering its penetration and heating of the substrate. The depth of penetration of all metals, including the most low-melting one, was determined during laser remelting on a metal substrate in the production of a high-entropy alloy. The practical significance of the developed computer model lies in its use to predict the penetrationdepth of a composite coating under specified technological modes of laser remelting. At the same time, its adaptation is necessary, based on experimental data on the porosity and thickness of the coating before and after melting of simple metal systems with similar thermophysical properties.