Technological features of furnace equipment part casting by gasified models

Saniya Kaskataevna Arinova, Aristotel Zeinullinovich Issagulov, Tatiana Kovalyova

iPolytech Journal, 2019

Full text Open access: Gold Metadata (CSL-JSON)
DOI 10.21285/1814-3520-2019-5-999-1006
Data confidence 70 medium
How this score is calculated

It is built from checkable properties of the record itself: whether the article has a DOI, how many independent sources confirmed its data, whether the required fields are filled in, and how recent the latest confirmation is. Disagreement between sources and a missing identifier lower it. A value of 80 or above means the record was published without further checking; 60 to 79 means it is published at reduced confidence, with a manual check advisable. A record verified by an editor by hand is never pushed below 90 by a recalculation. This scores our data about the article, not the article itself.

Abstract

The purpose of the work is to study the casting characteristics of a Fe-Cr-Ni-based alloy with improved heat-resistant properties for the production of a kiln roller part. The furnace equipment widely used in the metallurgical, petrochemical, machine-building and other branches of industry is made of heat-resistant steels. It is determined by the operation conditions: high temperature, significant loads, and duration of operation. Development of metallurgical technologies toughens working conditions and requires the properties of heat-resistant materials used for the manufacture of parts of metallurgical equipment to be improved. For this purpose, the influence of pouring temperature on the ingot porosity, alloy fluidity and the technological parameters of casting by gasified model casting have been determined. The composition of the heat-resistant alloy based on the Fe-Cr-Ni-alloying system is proposed. The fluidity of the experimental alloy is studied. It has been found that the fluidity of the experimental sample of steel at the pouring temperature of 1720 °C is 5-10% higher than the fluidity of steel 20Kh25N20S2. The conducted analysis of the programs has shown that the pouring temperature of 1720 °C is optimal in terms of pore distribution. The gating system for casting the part “kiln roller” is calculated. The proposed technology of furnace equipment casting manufacturing from an experimental heat-resistant alloy by gasified models casting allows to obtain high-quality castings that meet the requirements of operation at high temperatures and long-term loads.