Active Layer Thickness Effect on the Behavior of Electrodes Based on Lithium Iron Phosphate

E. K. Tusseeva, Tatiana L. Kulova, Alexander M. Skundin, Alina Galeyeva, Andrey Kurbatov

2019

Closed access Metadata (CSL-JSON)
DOI 10.1134/s1023193519020150
Data confidence 70 medium
How this score is calculated

It is built from checkable properties of the record itself: whether the article has a DOI, how many independent sources confirmed its data, whether the required fields are filled in, and how recent the latest confirmation is. Disagreement between sources and a missing identifier lower it. A value of 80 or above means the record was published without further checking; 60 to 79 means it is published at reduced confidence, with a manual check advisable. A record verified by an editor by hand is never pushed below 90 by a recalculation. This scores our data about the article, not the article itself.

Abstract

The effect of the active layer thickness (the amount of active material per unit area of the electrode) on the behavior of electrodes based on lithium iron phosphate was first studied by methods of galvanostatic cycling and cyclic voltammetry. When considering the electrode as a system with doubly distributed parameters (distribution of material composition along the individual LiFePO 4 grain radius and distribution of the process along the depth of the active layer), it was concluded that the distribution of the process over the depth of the active layer is much more pronounced than in the bulk of individual grains of lithium iron phosphate. It is assumed that such conclusion will be valid for electrodes from other materials.