STUDY OF THE WEAR RESISTANCE DEGRADATIONKINETICS OF ALN CERAMIC UNDER HEAVY ION IRRADIATION

Eurasian Physical Technical Journal, 2022

Full text Open access: Gold Metadata (CSL-JSON)
DOI 10.31489/2022no1/10-14
Data confidence 70 medium
How this score is calculated

It is built from checkable properties of the record itself: whether the article has a DOI, how many independent sources confirmed its data, whether the required fields are filled in, and how recent the latest confirmation is. Disagreement between sources and a missing identifier lower it. A value of 80 or above means the record was published without further checking; 60 to 79 means it is published at reduced confidence, with a manual check advisable. A record verified by an editor by hand is never pushed below 90 by a recalculation. This scores our data about the article, not the article itself.

Abstract

This work is devoted to the study of changes in the strength properties of AlN ceramics, in particular, the dry friction coefficient and parameters of wear resistance and surface defectiveness, depending on the dose of irradiation with heavy Xe22+ions with an energy of 200 MeV. Interest in these ceramics is due to their high thermal conductivity, hardness and wear resistance, as well as excellent insulating properties, which makes them promising candidate materials in nuclear power, rocket engineering and microelectronics. At the same time, the operation of these ceramics under conditions of external influences, such as mechanical friction, pressure on the surface, as well as the effect of ionizing radiation, requires additional research and obtaining new data on the stability and retention of properties during the entire service life. During the studies carried out, it was found that at low irradiation doses of 1010-1011ions/cm2, which are characterized by the formation of single point defects and a low probability of surface degradation as a result of the initialization of gas swelling processes, the dry friction coefficient practically does not change, which indicates ceramics high mechanical friction resistance. However, an increase in the irradiation fluence up to 1012ion/cm2, which is characterized by the processes of overlapping radiation-induced damaged areas, a deterioration in the dry friction coefficient is observed after 15000 test cycles, which indicates fatigue wear of the ceramic surface anddegradation as a result of external influences