Influence of heat transfer material on the deformability of knitted fabrics

Vitalija Masteikaitě, Virginija Sacevičienė, Elmira Kopbajeva, Maira Nurjasarova

2015

Closed access Metadata (CSL-JSON)
DOI 10.1108/ijcst-11-2013-0126
Data confidence 70 medium
How this score is calculated

It is built from checkable properties of the record itself: whether the article has a DOI, how many independent sources confirmed its data, whether the required fields are filled in, and how recent the latest confirmation is. Disagreement between sources and a missing identifier lower it. A value of 80 or above means the record was published without further checking; 60 to 79 means it is published at reduced confidence, with a manual check advisable. A record verified by an editor by hand is never pushed below 90 by a recalculation. This scores our data about the article, not the article itself.

Abstract

Purpose – To produce a coated fabric, a base fabric may be completely or partially coated with a polymer layer, which changes the properties of the new system relative to the base fabric. The purpose of this paper is to analyze the influence of the thermal transfer material and its shape on the deformability of knitted fabrics during the uniaxial extension and to determine the residual deformation of the thermoplastic transfer element of coated fabrics after unloading. Design/methodology/approach – Knitted fabrics were partially and entirely coated with heat transfer material. For partial coating, square pieces of three different transfer materials were bonded on the middle of the specimen. They were solid, perforated with either nine circular holes or six rectangular holes. A heat seal press was used to laminate knitted fabrics. The samples were subjected to uniaxial tensile testing. The characteristics such as strain at maximum force, strain at break, and strain at low stress were measured. After stretching and relaxation of the specimens, the residual deformation of the heat transfer element was also investigated. Findings – The results indicated that coating knitted fabrics with transfer material may decrease their stretchability. The experiments show that the decrease in stretchability and in the degree of residual deformation after stretching and relaxing depend on the knitted structure, the shape of the transfer element, and the degree to which the fabric is coated. Originality/value – This study examines the influence of heat transfer material which may be not only entirely but also partially joined with knitted fabric layer on the deformability and shape stability of this system.