Abstract
This paper presents new results of transmission electron microscopy (TEM), scanning electron microscopy (SEM), X-ray diffraction (XRD) and atomic force microscopy (AFM) investigation of the structure-phase compositions of coatings on the base of Ni and Co deposited by plasma-detonation on steel substrates after their modification by DC plasma jet irradiation. The phase structures and morphology of precipitation of strengthening phases from solid solution are defined. The irradiation of the coatings leads to the evolution of the structural-phase state of coatings: an increase in the size of the diffusion zone between the coating and the substrate, an increase in the volume fraction of hardening intermetallic phases, the formation of sufficiently homogeneous fine-grained structure in the irradiated coatings and, consequently, a significant increase of hardness, corrosion and wear resistance of modified coatings. There is a mutual penetration of the substrate main element Fe in the coating and base coating elements (Ni and Co correspondingly) into the substrate as a result of the coating treatment by a pulse DC plasma jet.DOI: http://dx.doi.org/10.5755/j01.ms.22.2.7699