Study of Structural and Strength Changes in Lithium-Containing Ceramics—Potential Blanket Materials for Nuclear Power, Subjected to High-Dose Proton Irradiation

2022

Full text Open access: Gold Metadata (CSL-JSON)
DOI 10.3390/ma15165572
Data confidence 70 medium
How this score is calculated

It is built from checkable properties of the record itself: whether the article has a DOI, how many independent sources confirmed its data, whether the required fields are filled in, and how recent the latest confirmation is. Disagreement between sources and a missing identifier lower it. A value of 80 or above means the record was published without further checking; 60 to 79 means it is published at reduced confidence, with a manual check advisable. A record verified by an editor by hand is never pushed below 90 by a recalculation. This scores our data about the article, not the article itself.

Abstract

The paper considers the hydrogenation processes in Li2TiO3 ceramics under irradiation with protons with an energy of 500 keV and fluences of 1 × 1010–5 × 1017 ion/cm2. The choice of the type of irradiation, as well as the irradiation fluences, is based on the possibilities of modeling hydrogenation processes and studying the kinetics of structural changes caused by the accumulation of radiation damage. The choice of Li2TiO3 ceramics as objects of research is due to their prospects for using as blanket materials of thermonuclear reactors for the tritium production and accumulation. It was found that the formation of point defects and their subsequent evolution associated with the formation of complex compounds and the filling of pores, followed by the formation of gas-filled bubbles, the presence of which leads to a decrease in crack resistance and resistance to destruction of the near-surface layer. Based on the data on structural changes and evolution of the crystal lattice parameters, its swelling, a description of the destruction processes associated with hydrogenation in Li2TiO3 ceramics was proposed. Also, during the studies, it was found that at irradiation fluences above 1 × 1017 ion/cm2, the appearance of impurity inclusions characteristic of the TiO2 phase was observed, the presence of which indicates the crystal lattice destruction processes because of accumulation of radiation damage and deformations caused by them. Critical doses are established at which there is a sharp deterioration in strength and crack resistance, reflecting the resistance of ceramics to mechanical external influences.