Nanoscale thermal transport and elastic properties of lithiated amorphous Si thin films

2020

Full text Open access: Hybrid Metadata (CSL-JSON)
DOI 10.1016/j.matpr.2019.11.333
Data confidence 70 medium
How this score is calculated

It is built from checkable properties of the record itself: whether the article has a DOI, how many independent sources confirmed its data, whether the required fields are filled in, and how recent the latest confirmation is. Disagreement between sources and a missing identifier lower it. A value of 80 or above means the record was published without further checking; 60 to 79 means it is published at reduced confidence, with a manual check advisable. A record verified by an editor by hand is never pushed below 90 by a recalculation. This scores our data about the article, not the article itself.

Abstract

Silicon is the heart of modern electronics and due to it is high theoretical storage capacity it also attracted much attention as a possible anode material for the next generation Li-ion batteries. Heat conduction is one of the major properties in the development of Li-ion batteries for energy conversion systems and it is of paramount importance to have comprehensive understanding of heat dissipation on the scale of electrochemical storage device. In this work we report ex-situ study of nanoscale thermal transport and elastic properties of lithiated amorphous Si (a-Si) anode films using picosecond time-domain thermoreflectance (TDTR). Radio frequency ( rf ) magnetron sputtering was used to deposit a ∼330 nm thick a-Si films on glass substrate. Near-surface nanoscale thermal transport measurements show 40% increase in thermal conductivity of a-Si upon electrochemical lithiation reaching up to 2.2 W m -1 K −1 . This sizeable increase might be due to Li + ion-mediated heat conduction during lithiation process. The standard deviation of measured thermal conductivity was slightly higher likely due to inhomogeneous lateral and cross-plane Li + ions distribution in the sub-surface film region. Nanosecond laser pulsed induced surface acoustic waves (SAWs) measurements showed the decrease in Young’s modulus after lithiation on nanometre scale, which is attributed to volumetric expansion of Si upon Li + ions insertion.