Electrical Properties of Fluoro-Containing Alicyclic Polyimides

2015

Full text Open access: Hybrid Metadata (CSL-JSON)
DOI 10.17265/1934-7375/2015.01.004
Data confidence 70 medium
How this score is calculated

It is built from checkable properties of the record itself: whether the article has a DOI, how many independent sources confirmed its data, whether the required fields are filled in, and how recent the latest confirmation is. Disagreement between sources and a missing identifier lower it. A value of 80 or above means the record was published without further checking; 60 to 79 means it is published at reduced confidence, with a manual check advisable. A record verified by an editor by hand is never pushed below 90 by a recalculation. This scores our data about the article, not the article itself.

Abstract

The electrical, physical, mechanical and thermal properties of fluorine-containing alicyclic polyimides have been investigated.It was shown that the minimum value of the dielectric constant 1.91 at room temperature and 1 kHz frequency was achieved for polymers containing only one fluorine atom in the structure.The dielectric loss tangent of new polymers was (1-4)×10 -3 .Electro-physical parameters were stable during polymer heating up to 300 °C, and at the frequency from 1 to 20 kHz.Resistivity by heating in the air up to 320-380 °C has been investigated depending on the polyimides structure.The coefficient of moisture absorption for the fluorine-containing polyimide based on dianhydride with 4,4'-oxydianiline was determined at 50% humidity and 25 °C.It was around 0.6, but after immersion in the water for 24 and 48 h was 0.8% and 1.2%, respectively.Manufactured films had tensile strength to 160-170 MPa, and elongation up to 55%.