ПРОГНОЗ КУСКОВАТОСТИ ВЗОРВАННОЙ ГОРНОЙ МАССЫ С ИСПОЛЬЗОВАНИЕМ ЭНЕРГЕТИЧЕСКИХ ПОКАЗАТЕЛЕЙ БУРЕНИЯ НА МЕСТОРОЖДЕНИИ КОКТАСЖАЛ

2025

Closed access Metadata (CSL-JSON)
DOI 10.15372/ftprpi20250406
Data confidence 70 medium
How this score is calculated

It is built from checkable properties of the record itself: whether the article has a DOI, how many independent sources confirmed its data, whether the required fields are filled in, and how recent the latest confirmation is. Disagreement between sources and a missing identifier lower it. A value of 80 or above means the record was published without further checking; 60 to 79 means it is published at reduced confidence, with a manual check advisable. A record verified by an editor by hand is never pushed below 90 by a recalculation. This scores our data about the article, not the article itself.

Abstract

Образующиеся после взрыва крупные негабариты затрудняют отгрузку и транспортировку горной массы, что ведет к снижению производительности труда, увеличению себестоимости добычи. Рассмотрен показатель механической удельной энергоемкости шарошечного бурения с целью его использования в качестве критерия буримости пород для месторождения Коктасжал (Казахстан). На два буровых электрических станка DML-1200 устанавливалось дополнительное оборудование для регистрации исследуемых параметров энергопотребления. Определены взаимосвязи удельного расхода взрывчатого вещества с удельной энергоемкостью взрывного разрушения и пределом прочности на сжатие, между средним размером куска и удельной энергоемкостью бурения. При проектировании массовых взрывов на открытых работах обоснован переход от механической удельной энергоемкости бурения к удельной энергоемкости взрывного разрушения и в дальнейшем к прогнозированию размера среднего куска взорванной горной массы. Экспериментальные взрывы на карьере Коктасжал показали положительные результаты, открывающие перспективы исследований в этом направлении. Coarse oversize fragments generated by blasting complicate loading and haulage of rocks, and this leads to the decreased productivity of labor and to the increased cost of mining. This article analyzes specific energy of roller-bit drilling as a drillability criterion as a case of the Koktaszhal deposit in Kazakhstan. Two electric drill rigs DML-1200 were additionally equipped with energy consumption recording facilities. The correlations between the powder factor, explosive fracture energy and ultimate compression strength of rocks, and between the average fragment and specific drilling energy are determined. For the blast design practice in open pit mining, it is substantiated to pass from mechanical specific energy of drilling to specific energy of explosive fracture and, further, to prediction of an average fragment of blasted rock. The experimental blasting operations at the Koktaszhal open pit mine show positive results which open prospects for the further research.