High-speed silicon waveguide 3-to-8 decoder based on electro-optic effects

2023

Closed access Metadata (CSL-JSON)
DOI 10.1117/12.2648476
Data confidence 70 medium
How this score is calculated

It is built from checkable properties of the record itself: whether the article has a DOI, how many independent sources confirmed its data, whether the required fields are filled in, and how recent the latest confirmation is. Disagreement between sources and a missing identifier lower it. A value of 80 or above means the record was published without further checking; 60 to 79 means it is published at reduced confidence, with a manual check advisable. A record verified by an editor by hand is never pushed below 90 by a recalculation. This scores our data about the article, not the article itself.

Abstract

A high-performance silicon waveguide-based electro-optical 3-to-8 decoder is proposed in this work. Generic 500x220 nm dimensions of the waveguide provide compatibility with other devices and circuits. The length of the active region is 4.5 microns. The n-to-m electro-optical switching circuits utilize both forward and reversed bias NOT gates with a voltage input of -2.5 V and 2.5 V, for logic zero and logic high, respectively. The 3-to-8 decoder showed an input power of the optical signal of 1.26 mW, which is distributed within the circuit, resulting in the maximum output power of approximately 0.3 mW on each of the 8 terminals. 20000 dB/cm mode loss is achieved with a logic input controlled by ±2.5 V. Results show that a data-rate of up to 100 Gbit/s is achieved.