Abstract
This work aims to study the catalytic properties of Fe, Cr, and Cu catalysts deposited on chitosan–silica (SBA-15) composites in liquid phase oxidation of cyclohexane (CH) with H2O2 and photocatalytic hydrogen evolution reaction. The catalysts were obtained by consecutive adsorption of chitosan (CS) and metal ions (Fe3+, Cr3+, Cu2+) on SBA-15 at ambient conditions. Characterization of the catalysts by XRD, IR spectroscopy, XPS, TEM, SEM, etc., showed the CS and metal ion adsorption on the solid support. Modification with CS provided better immobilization of the metal ions on SBA-15. The synthesized catalysts demonstrated different performance in liquid phase oxidation of cyclohexane with H2O2 under mild conditions at 40 °C and atmospheric pressure. Cyclohexane conversion on Fe–CS/SBA-15 (18.5%) and Cr–CS/SBA-15 (21.6%) was higher than on Cu–CS/SBA-15 (9.3%). The influence of different conditions of the reaction such as time, temperature, catalyst dosage, substrate and oxidant ratio on cyclohexane conversion in the presence of the most efficient Cr–CS/SBA-15 catalyst was also studied. The optimal reaction conditions were found to be the following: duration of reaction—4 h, temperature of reaction—50 °C, mcat—0.03 g, a substrate/H2O2 ratio of 1:3. In addition, Cr–CS/SBA-15 and Fe–CS/SBA-15 catalysts were studied in a photocatalytic H2 evolution reaction. The Fe-containing catalyst demonstrated superior efficiency in photocatalytic H2 evolution. The total volume of hydrogen produced within 3 h was 103 mL/g. Thus, this study demonstrates that chitosan possesses promising potential in the design of the supported catalysts for cyclohexane oxidation and photocatalytic hydrogen evolution reactions.