Abstract
Abstract The article presents the results of a study of the interaction of titanium melt with of zirconates BaZrO3 and SrZrO3, as well as titanate SrTiO3 under vacuum conditions and in an inert atmosphere at normal pressure. An original titanium heating method was used during the experiments. It eliminated the melt circulation at the interface between the solid and liquid phases. The method was based on resistive electrical heating of a Grade 2 titanium alloy rod or strip pressed into BaZrO3, SrZrO3 and SrTiO3 powders. Studied the structure, elemental, and phase composition of the products formed during various (up to 300 s) contact of titanium melt with surface zirconates and titaniums. The phase composition was compared with the products obtained by heating compacts from a mixture of titanium powders with BaZrO3, SrZrO3 and SrTiO3 powders. It was shown based on the results obtained that titanium, upon contact with these ceramic materials dissolves zirconium and oxygen and reduces barium and strontium to a metallic state. Barium and strontium evaporated due to the high vapor pressure at the experimental temperature, and caused the melt to splash or form a vapor layer that reduced the interaction rate of the melt with the ceramic. When a titanium melt interacted with BaZrO3 and SrZrO3 intermediate phases were not formed in quantities sufficient for their identification. The Sr3Zr2O7 phase was formed in small quantities during heating a mixture of Ti+SrZrO3 powders. When a titanium melt interacted with SrTiO3, a layer of an intermediate phase was formed, similar in composition to TiO2. Equations for the chemical reaction of the interaction of titanium with the indicated zirconates and titanate were compiled based on the experimental data obtained. It has been shown that titanium melt weted the surface of BaZrO3, SrZrO3 powders well and poorly weted the surface of SrTiO3 powder.