Selective Reduction of Iron in High-Phosphorus Oolitic Ore from the Lisakovsk Deposit

2024

Full text Open access: Gold Metadata (CSL-JSON)
DOI 10.3390/ma17215271
Data confidence 85 high
How this score is calculated

It is built from checkable properties of the record itself: whether the article has a DOI, how many independent sources confirmed its data, whether the required fields are filled in, and how recent the latest confirmation is. Disagreement between sources and a missing identifier lower it. A value of 80 or above means the record was published without further checking; 60 to 79 means it is published at reduced confidence, with a manual check advisable. A record verified by an editor by hand is never pushed below 90 by a recalculation. This scores our data about the article, not the article itself.

Abstract

Reduction of iron in high-phosphorus oolitic ore from the Lisakovsk deposit using solid carbon, carbon monoxide, and hydrogen. An X-ray phase analysis was used to determine the phase composition of the samples after reduction roasting. When reduced with carbon monoxide or hydrogen, α-iron appears in the samples, while phosphorus remains in the form of iron, calcium, and aluminum phosphates. After roasting with solid carbon, phosphorus is reduced from iron and calcium phosphates and migrates into the metal but remains in aluminum phosphate. A micro X-ray spectral analysis showed that at a temperature of 1000 °C and a holding time of 5 h, during reduction with solid carbon, the phosphorus content in the metallic phase reaches up to 7.1 at. %. When reduced with carbon monoxide under the same conditions, the metallic phase contains only iron, and phosphorus is found only in the oxide phase. When reduced with hydrogen at 800 °C, phosphorus is almost absent in the metallic phase, but at 900 °C, phosphorus is reduced and its content in the metallic phase reaches 2.1 at. %.