Diammonium Hydrogen Citrate-Assisted Spray Pyrolysis Synthesis of Nanostructured LiCoPO4 Microspheres as High-Voltage Cathode Material for Lithium-Ion Batteries

ACS Omega, 2024

Full text Open access: Gold Metadata (CSL-JSON)
DOI 10.1021/acsomega.4c03752
Data confidence 85 high
How this score is calculated

It is built from checkable properties of the record itself: whether the article has a DOI, how many independent sources confirmed its data, whether the required fields are filled in, and how recent the latest confirmation is. Disagreement between sources and a missing identifier lower it. A value of 80 or above means the record was published without further checking; 60 to 79 means it is published at reduced confidence, with a manual check advisable. A record verified by an editor by hand is never pushed below 90 by a recalculation. This scores our data about the article, not the article itself.

Abstract

High Resolution Image Download MS PowerPoint Slide Nanostructured LiCoPO 4 (LCP) microspheres were successfully synthesized by one-step spray pyrolysis, adding an appropriate amount of diammonium hydrogen citrate (DHC) additive to the precursor solution. Comprehensive physical characterization confirmed that the obtained LCPs exhibited a desirable orthorhombic olivine structure with nanostructured morphology and a significant increase in specific surface area. This enhancement was attributed to the dispersion effect due to the carboxyl group and the evolution of the ammonium group of DHC during the pyrolysis process. The resultant LCP delivered a high initial discharge capacity of 132 mA h g –1 with 63.3% capacity retention (vs 103 mA h g –1 and 37.1% of bare-LCP) after 50 cycles at 0.1 C using the conventional electrolyte. Moreover, the electrochemical performance showed additional enhancement when a fluorinated electrolyte was introduced, resulting in initial and 50th discharge capacities of 141 and about 100 mA h g –1, respectively, at 0.1 C.