Abstract
Small-scale permanent magnet motor to reach high torque density and low torque ripple is discussed in this research. To increase the torque density, meanwhile making the motor size smaller and lighter, the motor axial length within a constrained diameter is optimized in view of various pole-slot configurations. Different slot-poles are selected and various combinations are studied, and the stator windings are optimized. To compare the torque density and ripple of new designs, precise models are created and simulated through ANSYS Maxwell 2D FEA under constant operational conditions, such as rated speed, torque, and power. Over the new designs, the influence of loss and temperature distribution variations in motor elements are analyzed. The simulation results show that the proposed 20-pole 18-slot motor design will obtain superior torque density and lower torque ripple compared to the baseline design. The final design provides a 30.7 % improvement of the torque density within the same rated torque condition.