Effect of slope geometry on stability of slope in Almaty

E3S Web of Conferences, 2023

Full text Open access: Gold Metadata (CSL-JSON)
DOI 10.1051/e3sconf/202338213005
Data confidence 70 medium
How this score is calculated

It is built from checkable properties of the record itself: whether the article has a DOI, how many independent sources confirmed its data, whether the required fields are filled in, and how recent the latest confirmation is. Disagreement between sources and a missing identifier lower it. A value of 80 or above means the record was published without further checking; 60 to 79 means it is published at reduced confidence, with a manual check advisable. A record verified by an editor by hand is never pushed below 90 by a recalculation. This scores our data about the article, not the article itself.

Abstract

Landslides bring destruction to buildings, and nearby located structures and mostly occur in rural areas. Such hazard commonly takes place in mountainous areas in Central Asia. Kazakhstan region has highly vulnerable areas to rainfall-induced landslides in South-Eastern parts due to presence of many mountains. The purpose of the research is to demonstrate the effect of slope geometry on slope stabilityunder heavy rainfall in Almaty, Kazakhstan. Transient seepage analyses were conducted using Seep/W while limit equilibrium slope stability analyses were performed using Slope/W. 15 sets of numerical analyses were carried out on different slope angle and slope height incorporating the soil-water characteristic curve and unsaturated permeability and unsaturated shear strength of soil from Almaty. According to the obtained simulation results in GeoStudio software for seepage analysis, the pore-water pressure is increased almost for 80 kPa at the mid slope of each simulation. The change of FoS for the gentlest slope with 27 degrees slope angle is the lowest for 10 m slope height and the highest for 30 m slope height, whereas the change of FoS for slope with 45 degrees of slope angle (9%) is almost the same for all slope height.