USE OF MAGNETIC FIELDS FOR INTENSIFICATION OF COAL GASIFICATION PROCESS

2022

Full text Open access: Gold Metadata (CSL-JSON)
DOI 10.17794/rgn.2022.5.6
Data confidence 70 medium
How this score is calculated

It is built from checkable properties of the record itself: whether the article has a DOI, how many independent sources confirmed its data, whether the required fields are filled in, and how recent the latest confirmation is. Disagreement between sources and a missing identifier lower it. A value of 80 or above means the record was published without further checking; 60 to 79 means it is published at reduced confidence, with a manual check advisable. A record verified by an editor by hand is never pushed below 90 by a recalculation. This scores our data about the article, not the article itself.

Abstract

Underground coal gasification is an alternative method for mining coal from thin and ultra-thin seams, which enables conversion of solid fossil fuels into combustible gases at the site of coal occurrence. At the same time, in the case when the coal seam thickness is critically small for the effective course of thermochemical reactions, it is necessary to intensify the gasification process. This paper studies one of the possible methods to intensify the process of underground coal gasification due to the influence of magnetic fields on the injected blast supplied into the gas generator gasification channel. Research tests conducted on a bench setup confirm the effectiveness of injected blast activation in a magnetic field by creating magnetic field inhomogeneity by placing permanent magnets and a discrete solid magnetized phase in a special device. For the first time, the dependence of changing growth of carbon participation during the solid fuel gasification process on changing magnetic field strength in the range of 0-600 E has been determined. It has been proven that the injected blast magnetization can significantly intensify the underground gasification process by increasing the carbon participation share in the fuel, which may be of practical importance for increasing the yield of combustible components.