Abstract
Chromite beneficiation tailings (CBTs) represent a significant environmental challenge, while simultaneously containing valuable metals that remain largely unrecovered. In this study, a sequential thermochemical–hydrometallurgical route was investigated for selective chromium extraction and the enrichment of platinum group metals (PGMs) from CBTs generated at the Donskoy Mining and Processing Plant. Alkaline sintering with Na2CO3 at 1000 °C followed by aqueous leaching enabled the transfer of up to 98%–99% of chromium into solution. The resulting residue was enriched in non-ferrous metals, rare earth elements, and PGMs. Subsequent sulfation roasting and water leaching promoted the dissolution of magnesium, nickel, and rare earth elements, while platinum and palladium remained predominantly in the solid phase, due to their low solubility under the applied conditions. Microstructural analysis using SEM–EPMA revealed that PGMs are selectively concentrated in Ni-bearing micro-inclusions, with local platinum content reaching up to 3.8 wt.% in Ni-rich regions. The proposed sequential processing strategy enables efficient chromium recovery and significant PGM enrichment in the residual phase, demonstrating the potential of CBTs as a secondary resource for integrated metal recovery.