Abstract
Analog memory is of great importance in neurocomputing technologies field, but still remains difficult to implement. With emergence of memristors in VLSI technologies the idea of designing scalable analog data storage elements finds its second wind. A memristor, known for its history dependent resistance levels, independently can provide blocks of binary or discrete state data storage. However, using single memristor to save the analog value is practically limited due to the device variability and implementation complexity. In this paper, we present a new design of discrete state memory cell consisting of sub-cells constructed from a memristor and its resistive network. A memristor in the sub-cells provides the storage element, while its resistive network is used for programming its resistance. Several sub-cells are then connected in parallel, resembling potential divider configuration. The output of the memory cell is the voltage resulting from distributing the input voltage among the sub-cells. Here, proposed design was programmed to obtain 10 and 27 different output levels depending on the configuration of the combined resistive networks within the sub-cell. Despite the simplicity of the circuit, this realization of multilevel memory provides increased number of output levels compared to previous designs of memory technologies based on memristors. Simulation results of proposed memory are analyzed providing explicit data on the issues of distinguishing discrete analog output levels and sensitivity of the cell to oscillations in write signal patterns.